The Smash Owner Info

Suspension Setup

Proper suspension set-up is critical for optimum performance. Due to variance in shock pump readings, we suggest using a ruler and a friend to help set sag.

Recommended front fork sag is 15% - 20%. Recommended shock sag is between 25% - 30%, depending upon ride style: 25% (12.5mm for a 50mm stroke length or 14mm for a 55mm stroke length) for more aggressive riders with a stiffer top stoke, and 30% (15mm or 16.5mm) for a softer, more forgiving feel.

Once your sag is all set, if you are looking for more bottom out resistance, add one volume spacer. If you find the sag you like, but are having trouble using the entire travel of the shock, remove one volume spacer.

To set sag:

  • Step 1: Compress the suspension several times to break the seal and get oil flowing
  • Step 2: Have a friend hold the bike while you sit on it in the climbing position, both feet on the pedals
  • Step 3: Have said friend move the fork o-ring down to the seal and the shock o-ring to the front of the air can
  • Step 4: Gently step off the bike and measure the distance between the o-ring and the seal and air can. This is your sag
  • Step 5: Adjust the air pressure using your shock pump to achieve the recommended sag setting (listed above). It may take a few times.

Owner's Manual

Click here to download The Smash owner's manual.

FAQ

We try to cover our most frequently asked questions here, but if you have further questions, don't hesitate to shoot us an email or give us a call.

Access Crush Mode using the upper rear shock hole location, this mode is optimized for all day rides and flow trails, with strong mid-stroke support. It is the go-to setting for climbing efficiency and riders that desire a more playful suspension set up.

Plush Mode utilizes the lower rear shock hole location and is the preferred mode for smashing rocks and superior traction. Plush mode gives riders a softer top stroke for more demanding, technical terrain.

You can run up to 160 mm fork, or any fork between a 552mm – 572mm axle-to-crown height.
Probably not. The Smash uses a 55 mm chainline, which is typically achieved with the following crank configurations: Race Face Cinch rings flipped, Race Face Plus spindles (143 mm), or a 0 mm offset ring on a 52 mm chainline SRAM crankset. For full details, please see the owner's manual.